Home > Solar Installation and Maintenance: How to Install Solar Panels

Solar Installation and Maintenance: How to Install Solar Panels

Solar installation is becoming the future trend as other resources are gradually depleted. Along with that, geothermal energy brings us many fantastic benefits such as cost savings and environmental protection. To own this energy source, you will need to work with professionals or contractors for sun installation. Even if you’re not directly involved in the installation, understanding the process and the issues involved will help you make better decisions. This article will help you know in detail how to install and maintain a sun power system.

solar installation everything about solar power

The basic process of solar installation and solar system maintenance

A precise and logical plan is essential for a successful insolation installation project. This plan will help you understand the steps you need to perform as well as the cost of each. Especially the components required for the solar system installation, installation, and maintenance procedures. Let’s look at these in more detail in the sections below.

1. Solar installation: Key components and tools for installing a solar power system

The most common and economical location to install an insolation system is on the roof of a building. Experts will assess the roof and installation orientation, the specifications for sun installation to capture the most sunlight. However, if it is not feasible to install on the roof, the solar panels will be installed on the ground as long as there are no sun obstructions.

Before proceeding with the installation, it is necessary to identify and prepare the system’s essential components. Photovoltaic panel components are very bulky, and great care should be taken to avoid damage, especially when transporting materials to the roof.

The main ingredients include:

  • Photovoltaic panels
  • Rack system
  • Roof sealant
  • Power inverter
  • Battery
  • Charge controller
  • Energy meter
  • Heatsink (if needed)
  • Wiring components for connecting system lines

In addition, to serve the installation work will need tools such as drills, screwdrivers, metal cutting saws, electrical wiring tools.

Solar system Installation 2-min

If you want to research more about the structure of the solar energy system, please refer to the following article: Solar installation: everything you need to know about solar power

2. Solar Installation Process: Basic steps in the process of installing a solar power system

There are many issues to consider when making a renewable energy installation plan. However, you’ll want to start by hiring a reputable solar service like VIVABLAST. They will provide all the information you need to come up with an efficient solar system installation plan and get it right.

The following steps are the basic process for rooftop solar system installation

  • Check for Compatibility

The installation expert team will have the first review of the roof and assess whether it is qualified to install the solar panel system. Ensure the location gets the maximum sun, considerable enough, and sturdy sufficient to install the panels. It will be necessary to remove or prune tree branches and upgrade the electrical panel system in many cases.

  • Select size for the system

Depending on the need to use electricity and the purpose, each solar panel system will be different. You will need to decide on the desired size for the contractor to develop the most specific and appropriate plan.

  • Sign up for construction slips

Before making alternative energy installation plans, you need to obtain a building permit from the locality. After having the approval results, the contractor can immediately implement the plan. Usually, large contractors have quality components and materials available for installation, so you won’t need to waste time searching for supplies.

  • Set up the rack system

The installation technician will measure and mark the location to position the base system of the panels on the roof or the ground. Then fix the rack system to the surface in a direction that receives a lot of sunlight.

  • Install solar panels

Install the solar panels to the brackets using the clamps provided to secure them in place. Then wire each panel to adjacent panels and install the wiring.

  • Install the heatsink

The heatsink is a device that aims to reduce the heat generated by the panels and increase the system’s efficiency. In many cases, they are integrated with the panels, and if not, an external heatsink will be required.

  • Install solar inverter

The next step in the sun installation process is to connect the solar inverter to the system. The contractor will choose the most convenient location to install the inverter, ensuring that they operate efficiently and safely.

  • Check the electricity and connect the system to the electric circuit

Before connecting the solar panel wiring to the home, a technician will recheck all the wiring. After meeting the requirements, the inverter will be connected directly to the electrical panel and to the building’s electrical network for electricity use and exploitation. The final step is to power on, and test run. So the solar system installation is complete.

Refer to the scaffolding service to access the installation of a solar panel system on the roof: Overview of ringlock scaffolding – Safety and Save cost solution for your business

3. Solar Panel Maintenance: Work required after completing the solar installation

Solar panels require minimal maintenance because the solar battery system has no moving parts. There are not many fees after you have invested in a high-quality geothermal installation.

Solar system Installation 1-min

However, you should periodically check the components and the entire system several times per year for dirt and foreign objects. Keeping the panels clean and free of obstructions will ensure peak performance. Moreover, reputable contractors will provide maintenance and inspection services for your solar system. They will also offer general maintenance and usage requirements to keep the system in good working order for the long term.

Renewable energy systems are a cost-effective way to save money while also providing a reliable, clean energy supply. On the other hand, the solar energy system is a time-consuming and challenging task. As a result, most solar installations are completed by a professional solar contractor. A contractor will also be able to assist you in obtaining any incentives to which you are entitled.

With many years of expertise in clean energy solutions, VIVABLAST is confident in its ability to provide you with an efficient, safe, cost-effective, and long-term sun energy solution. Our solar installation services include the following:

  • With the highest-grade items on the market, you can rest certain of absolute quality.
  • We use advanced construction technology, high efficiency, and continual innovation to provide consumers with complete services.
  • The building procedure is rigorous and tailored to the customer’s requirements.
  • The professionals have a lot of experience, are highly specialized, and execute an excellent job.

Other news

Coppyright © 2019 Vivablast. All right reserved